Configuring Switch Settings¶
Video Tutorial
Watch the companion video Chapter 7: How to Configure Switches for a visual walkthrough of these steps.
Overview¶
After adding switches to your network, you need to configure their button functions and behavior. This article explains the available settings and how to customize your switches.
Accessing Switch Settings¶
- Navigate to the Discover page, then tap Switches.
- Tap on the switch you want to configure.
- Tap the Settings button in the upper right corner.
- The switch configuration panel opens.
Button Functions¶
Button functions vary by switch model. Some buttons have pre-defined functions that cannot be changed, while others are fully configurable.
Standard Button Functions¶
| Function | Behavior |
|---|---|
| On | Turns associated lights on |
| Off | Turns associated lights off |
| Dim Up | Increases brightness |
| Dim Down | Decreases brightness |
| Scene | Activates associated scenes |
Special Functions (8-Key Switches)¶
On an 8-key switch, keys 1–4 are the assignable scene buttons — each one can be assigned one of the following scene-button presets. DIM+, DIM−, ON, and OFF are fixed-function keys and are not assignable.
| Preset | Behavior |
|---|---|
| On | Turns lights on |
| On/Off | Toggles lights on and off |
| 100% | Sets lights to full brightness |
| 100%/off | Toggles between 100% and off |
| 15 min off | Turns off after 15 minutes |
| 30 min off | Turns off after 30 minutes |
| 1 hour off | Turns off after 1 hour |
| 2 hours off | Turns off after 2 hours |
| 4 hours off | Turns off after 4 hours |
Timed Shutoff¶
Timed shutoff delays allow users to turn off lights after a specified period. This is useful for:
- End of meetings
- Leaving a space but wanting lights on temporarily
- Energy management without immediate darkness
Important Note¶
Timed shutoff is interrupted and canceled if you manually adjust the lights via: - The app - Another switch - A schedule
Dimming Behavior¶
Press vs Hold¶
| Action | Behavior |
|---|---|
| Quick press | Triggers preset step (e.g., 10% change) |
| Press and hold | Continuous dimming until released |
Saving Configuration¶
- Settings are typically saved automatically
- Always test the switch after configuration
- Press each button and verify expected behavior
Synchronization Requirement¶
Critical: Whenever you update a group or scene associated with a switch, you must:
- Open the switch settings
- Re-save the configuration
This ensures the switch has current information and operates correctly.
Example Configuration (8-Key Switch)¶
DIM+, DIM−, ON, and OFF are fixed-function keys on an 8-key switch. Keys 1–4 are the assignable scene buttons — assign a preset (or a scene, see Associating Scenes and Groups to Switches) to each:
| Button | Assignment |
|---|---|
| 1 | 100% |
| 2 | On/Off |
| 3 | 15 min off |
| 4 | 30 min off |
| DIM+ | Increase brightness (fixed) |
| DIM− | Decrease brightness (fixed) |
| ON | Turn lights on (fixed) |
| OFF | Turn lights off (fixed) |
Troubleshooting¶
| Issue | Cause | Solution |
|---|---|---|
| Button not responding | Not configured | Assign function to button |
| Wrong behavior | Settings out of sync | Re-save switch settings |
| Timed shutoff not working | Interrupted by other control | Avoid adjusting during countdown |
| Dimming too fast/slow | Press vs hold behavior | Use quick press for steps; press and hold for smooth dimming |
Quick Reference¶
| Action | Steps |
|---|---|
| Access settings | Discover → Switches → Tap switch → Settings |
| Configure button | Select button → Choose function |
| Test switch | Press each button, verify response |
| Sync after changes | Open settings → Save again |